quiver in transit...

Every option covered! Lovely bespoke Oddsocks board bags too!

So FINALLY a little bit of swell to write home about, the sun has been shining and the water has warmed up a little. The new Nineplus 3/2 retro full suit has been keeping me toasty, if only i could say my arms have been performing as well! It's depressing how quickly you lose paddle fitness, well i do anyway!

This time last year i was surfing Rincon and i can't help wishing we had booked flights this year too. Subscribing to the coastal push is not helping. The bank manager is happier but i miss surfing right hand pointbreaks! Next year hopefully.........

On the subject of subscriptions, i've recently had the first couple of issues of Foam Symmetry magazine. It's an Australian mag with Justin Bevan and Dane Peterson at the helm so you know it's going to be visually beautiful. It's high on content, low on advertising with creative use of design and paper stock, much closer to surfers journal than surfer but with more edge. I'd probably describe it as a paper distillation of the exciting stuff that's happeneing on the innumerable blogs out there. It's well worth a look if you get the chance. There's a cool article on the UK hip wigglers by Russ Pierre in issue two.

It may just be me, but whenever i've been out of the water for more than a couple of weeks, i'm always thankful i can still remember how to surf. I guess it's like riding a bike but it's always nice to get that first wave out of the way and know you can still make stuff happen. I've definately been feeling rusty this week though, bogging rails at stupid moments, making the wrong split second timing decisions.

Still it's been hella fun and thats the whole point when you think about it! Long may it continue.....

relations

Two different branches of the simmons design tree with the same basic ideas within them but a different application.

It's interesting how influential Richard Kenvin and his championing of Simmon's ideas has been over the last few years in terms of board design outside the thruster realm. Although you could argue that the recent trend to shorter wider thrusters has some roots here also!

Before Kenvin's original simmons replicas no one was really using the concepts Simmons came up with all those years ago, with the possible exception of the hull crews and whilst related, they are very much a different type of craft. Since then, more and more shapers are offering some kind of take on the concept.

Take these two, both definately directly inspired by Kenvin but neither direct copies of the original "casper"

On the left is a 5'2 Tyler Warren Bar of Soap. The shape originally came from Tyler making a small version of the original "casper" mini-simmons for the daughter of his father's friend. It came out so well, he kept the first and made her another! Hands down the favorite board i've owned to date. It has the chracteristic short wide mini sim style but with the wide point pulled aft of center, snub nosed with a wide tail block. It's stringerless with two very wide based keels which owe more to a conventional keel fish than the half moon simmons style. The bottom contours are the classic simmons bellied entry into flat but through the fins theres vee and deep double concave (spiral vee if i remember correctly!) The rails are soft in the front third but pretty hard through the fins and pretty thinned out.  In the water it's fast and lively, very responsive, probably best described as a fish with afterburners. I've overtaken people who've dropped in on me on this one on more than one occasion. Although it's still a lateral style board it's looser off the top and goes more vertical more easily than the other mini sims i've ridden.

On the right is a 5'6 Jeff McCallum Mford. Named after Jeff's tattooist mate Milford Barnes, he asked Jeff to make a board that felt like floating on a cloud (allegedy - it's unclear how many ales had been consumed at this point!) Jeff is credited with making the second ever mini simmons and is part of the same san diego surf scene that spawned kenvin. This board takes the bottom contour and the rails of the simmons but marries it to a template based on Greenough's velo kneeboards with a widepoint forward and a narrower tail block. The fins are quad half moon keels and the deck is concave. The rails are softer and rounder than the soap but still follow the same high to low shape. Bottom shape is still bellied entry but very quickly goes flat for most of the board with a medium single concave through the fins. In the water it's more idiosyncratic to surf, smoother and more flowing through the water, more lateral, more hull notes in there. It's wider and a bit flatter and goes better (brilliantly) in junk waves.

There are lots more variations on these ideas out there. Mccallum himself makes at least two other shapes based on the simmons idea, Royal makes his Simzers, Baugess makes copies of the original casper and bing, zamora and christenson all have versions. Unfortunately hardly anyone over here has jumped on board although dale walker and Tim Mason have been making some, steve croft at empire has his lumus model (a bonzerised quad version) and Nineplus have one in their new Hasu range thats out soon . It's only a matter of time before more shapers do, they are superbly suited to our regularly average waves and a whole heap of fun!

logshop...

Part of the roomy interior of the Nineplus shop in Braunton, snapped whie Rob made me a coffee.

It's the closest shop around at the moment  in vibe (except revolver maybe) to the californian shops like Thalia or Mollusc.

With some nice US made logs, Vans, Levi's, some vintage clothes and smooth skin wetsuits, it's worth sticking your head through the door on your way over to Gulfstream to check out their locally made beauties.

flare/flair

A couple of weeks ago i had the chance to ride a Bing Lovebird model. 9'6 x 18 3/8 x 23 x 14 3/4 x3 and beautifully finished as all Bings are with the distinctive 3/4 deck fabric inlay charcteristic of this model.

It's not an out and out noserider, more of an all around single fin with a medium weight, shallow nose concave, a relaxed rocker, a lot of v in the tail and a tucked under edge to the rail in the back third. It's a board i've always liked the look of and it's quite similar to a gulfstream log i had a couple of years ago.

The day i rode it was a really glassy thigh - waist high with Saunton doing it's best slow pointbreak impression. Good clean logging waves but perhaps lacking the zip that the Lovebird is designed for.

Off the tail the board is lively and the vee is really noticeable having a slightly different feel to more bellied logs but getting the board on a rail and turning with ease. The board trims fast, zipping along as soon as you take your first steps forward. The weight feels good, heavy enough to give momentum but light enough to feel manageable.

On the nose it's solid enough. It has more rocker than my own boards and that felt a little strange. Getting five over is easy enough but it's not as easy to get all ten pinkies over as it is on a loggier board, though i guess thats not really the only point here. It's also true that the shape is designed with faster or slightly bigger waves in mind than i rode it in.

So overall i quite liked it but i wasn't blown away. It's not ideal for small waves and personally i dont ride a log in anything over 2 ft at the moment. Not for me right now then. I do think it would be a good choice as a one board quiver for the travelling traditional minded surfer or a versatile single fin for those who are still on longboards from shoulder to a little overhead waves.

Obviously it's all just my opinion and what do i know really!

how much rubber?

Jake and Anna contemplate how many extra bits of neoprene they need to put on before paddling out over here.

timmy's trust........

Longtime readers on here will have heard my appreciative comments about Tim Mason's surfboards. Tim is a real craftsman and one of the nicest men you could possibly hope to meet. Tim probably knows more than anyone else in Europe about hull style boards and makes beautiful displacement hulls as well as some lovely casper inspired mini simmons.

What lots of you wont know is that Tim is a real family man and at the end of the last year lost his 7 year old son Timmy after a long battle with cancer. It's such a sad thing that you feel even more keenly when you have your own children.

Tim and his wife Kate have set up The Timmy Mason Trust to help families in a similar situation in the future and to keep Timmy's memory alive.  Their first goal is to raise £5000 to achieve UK charitable status which will really mean they can move the trust forward. They would gladly recieve any donations of course.

To help raise funds, Tim is intending to auction off one of his beautiful boards every month. First up is the lovely Lis inspired fish in the pictures. It's 6'4 and like all of Tim's boards it's a thing of beauty and sure to be a joy in the water. Search my earlier posts to find out how much i rate Tim's shaping!

If you are interested in this board or to see what's available next month check here.

flotsam...

 

and bexon!

a minor disaster...

So in my minds eye this was a cool little set up for a photo of a new addition to the quiver (it's a 5'6 Mccallum Mford just so you know!) All good until i dropped the camera about ten minutes later...... Much of the charm of taking pictures with toy camera's like the holga comes from there cheap build quality yielding quirky images. It also means they are very much basically cheap crap plastic!

So i dropped the camera, lunged for it, nearly grabbed it, watched in slow motion as it bounced off my outstretched hand onto the pavement, inwardly groaned as the back of the camera flew off exposing the nearly finished roll of 35mm to bright daylight...........in the words of the great homer simpson DOH!

Thankfully i only lost a couple of pictures, a few were unscathed and these two i sort of rescued in iphoto. All part of a fairly crappy week where my laptop died taking a load of files with it and i came within an ace of rolling my van but thats another story!

I'm going to write a proper report on the board when i've ridden it more but first impressions are that it's really fun, even in utter junk surf, up and planing early with a really shocking amount of lateral speed with a real positive on rails feel and without the slip slideyness of wider tailed simmons shapes. Oh and it looks beautiful, a real eye pleasing shape with a real organic tactile feel, much like a nice hull has........anyway......

torn like an old dollar bill.............

Possibly the best laminate ever!

Ride report to follow soon but this video pretty much sums it up.......

soap and chair no.2

slip sliding away..

Over the last few weeks i've been trying out a 9'6 james parry model by Slide 65 out of gwithian, shaped by Rob Wright. I really wanted to like it, it looks great, the black stealth finish is cool and i like the way Rob has consolidated the younger sennen crew over the last year, providing a rallying point for the talent they have and starting to give their little scene a collective identity. Unfortunately so far i've found it's not quite my cup of tea..............................

Admittedly the one i have is a protoype, they have pulled the nose in a little on the newer ones. This one is medium  weight, a relaxed log style rocker, 9'6 x 18 x 22.75 x 14.75 x 2.7/8. Where it differs from a classic log (and where i think my own feelings stem from) is in the rails and the base. The rails are 60/40 rather than 50/50. In another departure, there is a fairly deep concave in the nose but this mellows and extends back to 3/4's of the length of the board. The idea is to create a really fast trimming board that noserides well but cuts back with more performance than a standard heavy log. It uses a greenough 4a fin to aid in this respect.

So to the review........... Paddles great, people often make noises about concave boards paddling badly but i honestly don't think it makes that much difference, rocker does though and the rocker here is nicely judged, flat enough to feel stable while trimming and walking, just enough lift to make steep takeoffs a possibility. It does trim fast, in a peaky wave it outruns the pocket quickly and it is good on the nose, stable and responsive. It's off the tail that my problems manifest, and i should be clear i think this is more to do with a mismatch between my surfing and the shape rather than the board iself. While the concave helps as you move forward, from the back, to me the board feels a little awkward, sometimes whipping round, other times feeling sticky and catchy without the smoothness i'm used to. The slightly harder rails add to this feel. As a result my surfs have been peppered with moments of brilliance and frustration in equal measure and i've struggled to feel like i'm in sync with the board.

I think it likes / needs a little steepness to the wave for starters (which almost everywhere but saunton has!) I also feel that i've ridden so many logs with varying degrees of belly over the years that my style has evolved into a particular groove that doesn't fit here. Mine is a (hopefully) smooth style guiding the board through turns with gentle weighting of the rail with footwork , a real stall and trim style. I haven't ridden a progressive flat bottomed longboard consistently ever and not at all for over 5 years. James, on the other hand, as well as being a great surfer, spent a lot of the last few years riding competition boards where turns are more about planting your weight and driving the board around and i think this board fits far better with that style. It's probably a good log for someone who rides a "modern" longboard as well which ultimately isn't me!

I feel a little bad about posting anything negative on here because i like what Rob and friends are doing. Hopefully this comes across as fair and balanced and that it's not the boards failings that are the issue. This is just one model out of several  that Rob makes and i'm sure there are others that would suit just fine, hopefully i'll get to try something else in the future!

logtacular....

Adam Greenman, friend of The Stig, all round top chap and UK importer for Bing, Jacobs, Junod and lots of other californian goodness just revamped his website........finally! Believe me it's been a long time coming!  So instead of looking out of the window at the gloomy british weather click on over and drool over some fine surfcraft..................

the dirk of doom

 

Absolutely not a death dagger.........9'4 x 16 x 22.5 x 14.75 x 2 7/8 by the Squire

A long time ago, in a galaxy far, far away, i ordered a surfboard from a wandering minstrel. I didn't get quite what i asked for. I'm not going to rehash the whole story here, the tale was posted previously and you can read it here. I felt somewhat let down and nervous of re-entering the kingdom of kegel again.

As luck would have it, the Squire who hosted the wanderer did feel that something should be done. After measuring the original in great detail he ordered his workers at seabase to shape a replacement, pulling the original template out to the dimensions i'd wanted but otherwise copying the original as far as possible.

The result is the beauty in the photos, which (apologies to john) don't come close to doing it justice. The tint is ace and the finish really out of the top drawer. It's flat, foiled out with soft pinched rails, a hint of concave, a tiny bit of tail kick and some gentle belly in the back. The fin is a slightly raked volan flexy affair, taken from the original gato board. The proof as they say, is in the eating and however good a board looks on the rack, it's in the water that it's true nature is exposed. This isn't supposed to be a noserider, more of a tool for what we might term the new involvement school of surfing, referencing the surfing of Chonoski  and Knost and friends, who in turn are influenced by Nat Young and friends of the magic sam vintage. Namely pocket noseriding with full rail commited turns in a traditional sense. (i know what i'm talking about even if that's confused you!) It's made for waves with good shape and a little pace but not necessarily size.

In the water, it paddles fine, as well as modern progressive longboard. Take off's are a little late compared to a true log but the lack of nose area helps avoid pearling despite the flat rocker. It trims fast and feels responsive and alive under your feet although it demands quick footwork. Bottom turns have a nice spring off the flex in the fin and cutbacks whip around with weight firmly over the fin. In short, a lot of fun and similar to the gato. Noseriding is obviously more of a critical affair with a 16 inch nose but with a steep pocket forming around you and quick feet the board will lock in nicely. In fact, in bowly little waves, the narrowness probably works in your favour making it feel much more manageable. It trims fast and holds really well on the nose through sections and cheating five while head dipping is particularly fun. It will allow a brief ten over though thats hardly the point of the excercise. It is exactly what i wanted and i feel somewhat vindicated that the dims and shape i originally envisaged do perform how i imagined and ultimately how i wanted. It's definately a departure from most of the longboards in the uk right now, not that easy to surf and most definately not everyone's cup of tea but......... For someone like me who rides longboards a lot but has no interest in the 3 finned variety, it's a really fun departure from the norm.

So there you have it, the best and the worst of the custom surfboard experience in one episode! Big thanks to John Isaac for sorting it out patiently and Phil Hodge for taking care with something out of the ordinary. If you're looking for a new board squire are worth considering. contact john here or here

As an aside, if you have read the comments on the previous post you will see that robbie did offer to swap the board for a used one of his or shape me another (at cost!) when he came back to europe this summer. Perhaps unsuprisingly he's already here (& perhaps gone who knows) but no contact to make good on the promise so far.

slide 65

I was conversing recently on the state of beautiful board building in the uk with Russ Pierre, a great photographer and a fine traditional minded logger in his own right. He pointed me in the direction of slide 65 a fairly new company based in gwithian. Russ loves his board and shaper Rob Wright has James Parry on board helping with design. Rob is originally a cabinet maker and has a good eye for detail. The glass jobs look flawless and inbetween the stock nuuhiwa-esque log shapes are a couple of more interesting looking designs. James' model in particular has a more refined shape and foil and looks influenced by whats been happening in the wider world lately with bladey pinched ralis, narrower nose and flexy raked fins

James reckons his latest board is one of the best logs he's had and most of the sennen crew were styling on them at the recent saunton BLU. I must admit to having been impressed on seeing them up close and if you are in the market for a new log they are well worth looking into

quiet peaks.......

far from the madding crowd.


Braving the wind and dodging flying surfboards i put my new fish through it's paces. At 5'6 x 20.5 x 2.5 ish it has less foam than anything i've had before, little enough to have given a few worries that i'd gone too small. My fears were unfounded though. It still paddles well and is so responsive and loose it feels like an extension of my feet, coming really square off the bottom and whipping through cutbacks with ease.

It's also the best fish i've ridden on my backhand. The decreased length really lets you feel like your weight is fully engaged on the rail on your bottom turn and it sticks less off the top too. Safe to say i'm looking forward to putting her through her paces in depth over the summer.

oh yeah, it's a gulfstream!

on the racks...

Perhaps i'm biased but i don't think anyone is making surfboards in the UK that are any better shaped or finished than Gulfstream. Maybe there are a couple of people that are comparable, but sadly i don't think there ar man people even trying to match the care and craftsmanship that most US logging labels strive for.

That said, i  have an order in with Squire, the label run by John Isaac and made by Seabase. Given John's eye for detail i'm sure it will live up to expectation.

blurred vision

This week i spent a very enjoyable evening at the Tiki offices seeing them launch their new range of epoxy boards. In between being force fed real ale by Tim Heyland (who i now hold partly responsible for my worst hangover in recent memory!) here's what i remember........

The boards are the frutition of a five year design process and represent an attempt to push board construction forwards by marrying natural and manmade materials to create something with the best of both. The original shapes are by Bruce McKee, an aussie who has shaped for quite a few big names over the years and range from a 5'9 shortboard up to a 7 foot something fun board shape. There are a couple of fish style SUP's in the range too but interestingly no longboards. Tim, who is a very good longboarder himself, doesn't feel the technology gives the right feel to longer shapes and i think that's probably right.

Each board is machine preshaped then hand finished from a eps foam blank. The first "clever bit" is the use of a much much smaller cell and therefore denser and stronger foam stringerless blank. From there things get a bit hazy but..........

The blank gets a layer of glass then the deck and bottom get a thin bamboo skin and the rails get a carbon fibre cloth wrap. The deck gets another 6oz patch where your feet go and the whole baord gets another 4oz layer of glass over all of it. What you end up with is four layers of glass on the deck and the equivalent of seven layers on the rails, but, and here's the second "clever bit",  because it's all epoxy, the boards come out lighter than a conventional PU shortboard!

Aesthetically they look lovely and feel well made. They are strong enough for a well built chap to jump on upside down without damage. I can't comment on how they surf... yet, but i know they spent a lot of time testing to try and avoid the corkiness and tinnyness that surfttechs are often accused of. The bamboo apparently gives a dynamic flex that you wouldn't find in a tufflite board.

They're not entirely my "cup of tea" and others will be far more qualified to comment on how well they work but it's cool to see something new, especially when it's homegrown.

catch of the day

 

The polish on this so shiny and so flat, there's no distortion to the reflection on it at all. Jools nails another class bit of kit. Jonesing to take it for a test drive now!

the man responsible......

 

Jool's Matthews, owner and shaper at Gulfstream surfboards in  North Devon, the man who was voted best fish shaper in the UK last year.

Jool's just shaped me a frankly lush looking 5'6 x 20 1/2 x 2 3/8 keel fish, it's not quite done yet but pictures and ride report to follow when it's actually in my grubby mitts! Gulfstream is a small operation in the true sense of surfboard manufacture as a cottage industry, but their shapes, finishing and attention to detail is excellent. Each board is a labour of love and craftsmanship and Jools really cares about delivering something he can be proud of. They're a great example of how ordering a custom spec handmade board can be a fantastic experience.

you know it makes sense